1-805-484-2992
Quotes - Engineering - SalesB10THx10/1P-SC-S 4x1"(45)
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 10 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B10THx10/1P-SC-S 4x1"(45) as shown on this page.
Description
B10THx10/1P-SC-S 4x1"(45) designates a SWEP B10T brazed plate heat exchanger with 10 plates in the pack. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. Reading the string: /1P is single pass; -SC is 316/316L stainless steel plates joined with copper. The closing S is the pressure class: 31 bar at 155 C. Connections are listed as 4x1"(45), in port order. The B10T plate pack measures 289 x 119 mm (11.38 x 4.69 in) on 243 x 72 mm port centres, and by SWEP's published weight formula a 10-plate unit comes to about 2.1 kg (4.7 lb) dry. The frame is published to 9 m3/h (39.63 GPM) - a port limit rather than a design flow. If the flow on either side would exceed the published ceiling, the answer is a larger frame, not more plates on this one.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
10
Pass Arrangement:
Single pass (1P)
Connections:
4x1"(45)
Plate Pack (A x B):
289 x 119 mm (11.38 x 4.69 in)
Port Centres (C x D):
243 x 72 mm (9.57 x 2.83 in)
Dry Weight (calculated):
2.1 kg (4.7 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
