1-805-484-2992
Quotes - Engineering - SalesB10THx30/1P-SC-S 2x1"INT HEX+2x3/4"INT HEX
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 30 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B10THx30/1P-SC-S 2x1"INT HEX+2x3/4"INT HEX as shown on this page.
Description
The B10THx30/1P-SC-S 2x1"INT HEX+2x3/4"INT HEX is a 30-plate build of the SWEP B10T. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing S is the pressure class: 31 bar at 155 C. The connection field reads 2x1"INT HEX+2x3/4"INT HEX. The B10T plate pack measures 289 x 119 mm (11.38 x 4.69 in) on 243 x 72 mm port centres, and by SWEP's published weight formula a 30-plate unit comes to about 4.0 kg (8.9 lb) dry. Maximum flow for the frame is 9 m3/h (39.63 GPM); that is a ceiling for the ports, not a duty point. If the duty has changed since the original equiptment went in, send the flows and both inlet conditions and we will confirm whether this configuration still fits.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
30
Pass Arrangement:
Single pass (1P)
Connections:
2x1"INT HEX+2x3/4"INT HEX
Plate Pack (A x B):
289 x 119 mm (11.38 x 4.69 in)
Port Centres (C x D):
243 x 72 mm (9.57 x 2.83 in)
Dry Weight (calculated):
4.0 kg (8.9 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
