1-805-484-2992
Quotes - Engineering - SalesB10THx40
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 40 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B10THx40 as shown on this page.
Description
Part number B10THx40 is the SWEP B10T frame carrying 40 plates. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The B10T plate pack measures 289 x 119 mm (11.38 x 4.69 in) on 243 x 72 mm port centres, and by SWEP's published weight formula a 40-plate unit comes to about 5.0 kg (11.0 lb) dry. The frame is published to 9 m3/h (39.63 GPM) - a port limit rather than a design flow. It is not necessary to send drawings for a like-for-like replacement - the string above carries the whole build.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
40
Plate Pack (A x B):
289 x 119 mm (11.38 x 4.69 in)
Port Centres (C x D):
243 x 72 mm (9.57 x 2.83 in)
Dry Weight (calculated):
5.0 kg (11.0 lb)
Materials of Construction
- Plates: 304 stainless steel
- Braze: Copper
Rating
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
