1-805-484-2992
Quotes - Engineering - SalesB10THx50/1P-SC-M 2x28U+2x1"&22U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 50 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B10THx50/1P-SC-M 2x28U+2x1"&22U as shown on this page.
Description
Part number B10THx50/1P-SC-M 2x28U+2x1"&22U is the SWEP B10T frame carrying 50 plates. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. It is catalogued with 2x28U+2x1"&22U connections. The B10T plate pack measures 289 x 119 mm (11.38 x 4.69 in) on 243 x 72 mm port centres, and by SWEP's published weight formula a 50-plate unit comes to about 5.9 kg (13.1 lb) dry. Maximum flow for the frame is 9 m3/h (39.63 GPM); that is a ceiling for the ports, not a duty point. Use this designation as the reference on a quote request; nothing more is needed until the duty itself changes.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
50
Pass Arrangement:
Single pass (1P)
Connections:
2x28U+2x1"&22U
Plate Pack (A x B):
289 x 119 mm (11.38 x 4.69 in)
Port Centres (C x D):
243 x 72 mm (9.57 x 2.83 in)
Dry Weight (calculated):
5.9 kg (13.1 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
