1-805-484-2992
Quotes - Engineering - SalesB12Lx30
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 30 | 74.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B12Lx30 as shown on this page.
Description
This is the 30-plate B12: SWEP designation B12Lx30. Its L plates are the low-theta pattern: less pressure drop per plate, and correspondingly more plates for the same duty. The B12 plate pack measures 287 x 117 mm (11.3 x 4.61 in) on 234 x 63 mm port centres, and by SWEP's published weight formula a 30-plate unit comes to about 3.5 kg (7.7 lb) dry. Maximum flow for the frame is 16.9 m3/h (74.41 GPM); that is a ceiling for the ports, not a duty point. Treat each side as an independant circuit when you ask for a quote: give both flows and what each fluid is.
Product Overview
Configuration & Size
Plate Type:
L - acute chevron, low pressure drop
Plates:
30
Plate Pack (A x B):
287 x 117 mm (11.3 x 4.61 in)
Port Centres (C x D):
234 x 63 mm (9.21 x 2.48 in)
Dry Weight (calculated):
3.5 kg (7.7 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 16.9 m3/h (74.41 GPM)
- Max Plates on Frame: 111
- Approvals: PED, UL, KHK
