1-805-484-2992
Quotes - Engineering - SalesB12MTx50/1P-SC-S 4x1 1/4"&28U(27)
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 50 | 74.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B12MTx50/1P-SC-S 4x1 1/4"&28U(27) as shown on this page.
Description
This is the 50-plate B12: SWEP designation B12MTx50/1P-SC-S 4x1 1/4"&28U(27). Reading the string: /1P is single pass; -SC is 316/316L stainless steel plates joined with copper. The closing S is the pressure class: 31 bar at 155 C. Connections are listed as 4x1 1/4"&28U(27), in port order. The B12 plate pack measures 287 x 117 mm (11.3 x 4.61 in) on 234 x 63 mm port centres, and by SWEP's published weight formula a 50-plate unit comes to about 5.8 kg (12.8 lb) dry. The frame is published to 16.9 m3/h (74.41 GPM) - a port limit rather than a design flow. If any field on your nameplate differs from the string above, tell us which one; a single letter is relevant to both rating and fit.
Product Overview
Part Number:
B12MTx50/1P-SC-S 4x1 1/4"&28U(27)
Series:
SWEP B12
Brand:
SWEP
SWEP Article Number:
14053-050
Configuration & Size
Plate Type:
MT
Plates:
50
Pass Arrangement:
Single pass (1P)
Connections:
4x1 1/4"&28U(27)
Plate Pack (A x B):
287 x 117 mm (11.3 x 4.61 in)
Port Centres (C x D):
234 x 63 mm (9.21 x 2.48 in)
Dry Weight (calculated):
5.8 kg (12.8 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 16.9 m3/h (74.41 GPM)
- Max Plates on Frame: 111
- Approvals: PED, UL, KHK
