1-805-484-2992
Quotes - Engineering - SalesB16Hx140
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 140 | 74.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B16Hx140 as shown on this page.
Description
B16Hx140 designates a SWEP B16 brazed plate heat exchanger with 140 plates in the pack. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The B16 plate pack measures 376 x 119 mm (14.8 x 4.69 in) on 320 x 63 mm port centres, and by SWEP's published weight formula a 140-plate unit comes to about 18.3 kg (40.3 lb) dry. The frame is published to 16.9 m3/h (74.41 GPM) - a port limit rather than a design flow. Treat each side as an independent circuit when you ask for a quote: give both flows and what each fluid is.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
140
Plate Pack (A x B):
376 x 119 mm (14.8 x 4.69 in)
Port Centres (C x D):
320 x 63 mm (12.6 x 2.48 in)
Dry Weight (calculated):
18.3 kg (40.3 lb)
Materials of Construction
- Plates: 316 stainless steel
- Braze: Stainless steel
Rating
- Max Flow: 16.9 m3/h (74.41 GPM)
- Max Plates on Frame: 50
- Approvals: PED, UL, KHK
