1-805-484-2992
Quotes - Engineering - SalesB16Hx20/1P-SC-S 4x1 1/4"(45)
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 20 | 74.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B16Hx20/1P-SC-S 4x1 1/4"(45) as shown on this page.
Description
This is the 20-plate B16: SWEP designation B16Hx20/1P-SC-S 4x1 1/4"(45). Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing S is the pressure class: 31 bar at 155 C. It is catalogued with 4x1 1/4"(45) connections. The B16 plate pack measures 376 x 119 mm (14.8 x 4.69 in) on 320 x 63 mm port centres, and by SWEP's published weight formula a 20-plate unit comes to about 3.9 kg (8.6 lb) dry. Maximum flow for the frame is 16.9 m3/h (74.41 GPM); that is a ceiling for the ports, not a duty point. Check the connection field seperately from the plate count: two units can be consistent in every other field and still not pipe up.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
20
Pass Arrangement:
Single pass (1P)
Connections:
4x1 1/4"(45)
Plate Pack (A x B):
376 x 119 mm (14.8 x 4.69 in)
Port Centres (C x D):
320 x 63 mm (12.6 x 2.48 in)
Dry Weight (calculated):
3.9 kg (8.6 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 16.9 m3/h (74.41 GPM)
- Max Plates on Frame: 50
- Approvals: PED, UL, KHK
