1-805-484-2992
Quotes - Engineering - SalesB16DWHx100/1P-SC-M 4x1 1/4"&28U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 100 | 48.40 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B16DWHx100/1P-SC-M 4x1 1/4"&28U as shown on this page.
Description
Part number B16DWHx100/1P-SC-M 4x1 1/4"&28U is the SWEP B16DW frame carrying 100 plates. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. Reading the string: /1P is single pass; -SC is 316/316L stainless steel plates joined with copper. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. Connections are listed as 4x1 1/4"&28U, in port order. The B16DW plate pack measures 377 x 119.5 mm (14.84 x 4.70 in) on 329 x 72 mm port centres, and by SWEP's published weight formula a 100-plate unit comes to about 23.6 kg (51.9 lb) dry. Maximum flow for the frame is 11 m3/h (48.40 GPM); that is a ceiling for the ports, not a duty point. Use this designation as the reference on a quote request; nothing more is needed until the duty itself changes.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
100
Pass Arrangement:
Single pass (1P)
Connections:
4x1 1/4"&28U
Plate Pack (A x B):
377 x 119.5 mm (14.84 x 4.70 in)
Port Centres (C x D):
329 x 72 mm (12.95 x 2.83 in)
Dry Weight (calculated):
23.6 kg (51.9 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 11 m3/h (48.40 GPM)
- Max Plates on Frame: 140
