1-805-484-2992
Quotes - Engineering - SalesB25THx30/1P-SC-S 4x1"&22U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 30 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B25THx30/1P-SC-S 4x1"&22U as shown on this page.
Description
This is the 30-plate B25T: SWEP designation B25THx30/1P-SC-S 4x1"&22U. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing S is the pressure class: 31 bar at 155 C. The connection field reads 4x1"&22U. The B25T plate pack measures 526 x 119 mm (20.71 x 4.69 in) on 479 x 72 mm port centres, and by SWEP's published weight formula a 30-plate unit comes to about 7.5 kg (16.4 lb) dry. Maximum flow for the frame is 9 m3/h (39.63 GPM); that is a ceiling for the ports, not a duty point. If any field on your nameplate differs from the string above, tell us which one; a single letter is relevant to both rating and fit.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
30
Pass Arrangement:
Single pass (1P)
Connections:
4x1"&22U
Plate Pack (A x B):
526 x 119 mm (20.71 x 4.69 in)
Port Centres (C x D):
479 x 72 mm (18.86 x 2.83 in)
Dry Weight (calculated):
7.5 kg (16.4 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
