1-805-484-2992
Quotes - Engineering - SalesB25THx50/1P-SC-S 4x1"(20)
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 50 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B25THx50/1P-SC-S 4x1"(20) as shown on this page.
Description
B25THx50/1P-SC-S 4x1"(20) designates a SWEP B25T brazed plate heat exchanger with 50 plates in the pack. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing S is the pressure class: 31 bar at 155 C. The connection field reads 4x1"(20). The B25T plate pack measures 526 x 119 mm (20.71 x 4.69 in) on 479 x 72 mm port centres, and by SWEP's published weight formula a 50-plate unit comes to about 11.0 kg (24.3 lb) dry. The frame is published to 9 m3/h (39.63 GPM) - a port limit rather than a design flow. Thermal performence depends on the duty as much as on the part number, so include the fluids if the unit is going into a new application.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
50
Pass Arrangement:
Single pass (1P)
Connections:
4x1"(20)
Plate Pack (A x B):
526 x 119 mm (20.71 x 4.69 in)
Port Centres (C x D):
479 x 72 mm (18.86 x 2.83 in)
Dry Weight (calculated):
11.0 kg (24.3 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
