1-805-484-2992
Quotes - Engineering - SalesB25THx80/1P-SC-M 2x28U+2x1"&22U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 80 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B25THx80/1P-SC-M 2x28U+2x1"&22U as shown on this page.
Description
B25THx80/1P-SC-M 2x28U+2x1"&22U designates a SWEP B25T brazed plate heat exchanger with 80 plates in the pack. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. Connections are listed as 2x28U+2x1"&22U, in port order. The B25T plate pack measures 526 x 119 mm (20.71 x 4.69 in) on 479 x 72 mm port centres, and by SWEP's published weight formula a 80-plate unit comes to about 16.3 kg (36.0 lb) dry. The frame is published to 9 m3/h (39.63 GPM) - a port limit rather than a design flow. If the duty has changed since the original equipment went in, send the flows and both inlet conditions and we will confirm wether this configuration still fits.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
80
Pass Arrangement:
Single pass (1P)
Connections:
2x28U+2x1"&22U
Plate Pack (A x B):
526 x 119 mm (20.71 x 4.69 in)
Port Centres (C x D):
479 x 72 mm (18.86 x 2.83 in)
Dry Weight (calculated):
16.3 kg (36.0 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
