1-805-484-2992
Quotes - Engineering - SalesB26Hx50/1P-NC-M 12.8+16+2x1"&22U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 50 | 49.75 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B26Hx50/1P-NC-M 12.8+16+2x1"&22U as shown on this page.
Description
The B26Hx50/1P-NC-M 12.8+16+2x1"&22U is a 50-plate build of the SWEP B26. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. Reading the string: /1P is single pass; -NC is AISI 304 stainless steel plates joined with copper. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. Connections are listed as 12.8+16+2x1"&22U, in port order. The B26 plate pack measures 376 x 119 mm (14.8 x 4.69 in) on 329 x 72 mm port centres, and by SWEP's published weight formula a 50-plate unit comes to about 7.1 kg (15.7 lb) dry. Maximum flow for the frame is 11.3 m3/h (49.75 GPM); that is a ceiling for the ports, not a duty point. Depth is the one dimension that changes across the plate counts of a series, so measure the space behind the unit before moving to a larger pack.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
50
Pass Arrangement:
Single pass (1P)
Connections:
12.8+16+2x1"&22U
Plate Pack (A x B):
376 x 119 mm (14.8 x 4.69 in)
Port Centres (C x D):
329 x 72 mm (12.95 x 2.83 in)
Dry Weight (calculated):
7.1 kg (15.7 lb)
Materials of Construction
- Plates: AISI 304 stainless steel
- Braze: Copper
- Material Code: NC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 11.3 m3/h (49.75 GPM)
- Max Plates on Frame: 160
- Approvals: PED, UL, KHK
