1-805-484-2992
Quotes - Engineering - SalesB80Hx30/1P-SC-S 12.8+22U+2x1 1/4"&28U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 30 | 74.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B80Hx30/1P-SC-S 12.8+22U+2x1 1/4"&28U as shown on this page.
Description
Part number B80Hx30/1P-SC-S 12.8+22U+2x1 1/4"&28U is the SWEP B80 frame carrying 30 plates. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. Reading the string: /1P is single pass; -SC is 316/316L stainless steel plates joined with copper. The closing S is the pressure class: 31 bar at 155 C. The connection field reads 12.8+22U+2x1 1/4"&28U. The B80 plate pack measures 526 x 119 mm (20.71 x 4.69 in) on 470 x 63 mm port centres, and by SWEP's published weight formula a 30-plate unit comes to about 7.5 kg (16.6 lb) dry. Maximum flow for the frame is 16.9 m3/h (74.41 GPM); that is a ceiling for the ports, not a duty point. Check the connection field separately from the plate count: two units can be consistent in every other field and still not pipe up.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
30
Pass Arrangement:
Single pass (1P)
Connections:
12.8+22U+2x1 1/4"&28U
Plate Pack (A x B):
526 x 119 mm (20.71 x 4.69 in)
Port Centres (C x D):
470 x 63 mm (18.5 x 2.48 in)
Dry Weight (calculated):
7.5 kg (16.6 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 16.9 m3/h (74.41 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
