1-805-484-2992
Quotes - Engineering - SalesB85Hx30/1P-SC-M 4x1"
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 30 | 74.85 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B85Hx30/1P-SC-M 4x1" as shown on this page.
Description
B85Hx30/1P-SC-M 4x1" designates a SWEP B85 brazed plate heat exchanger with 30 plates in the pack. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. Reading the string: /1P is single pass; -SC is 316/316L stainless steel plates joined with copper. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. The connection field reads 4x1". The B85 plate pack measures 526 x 119 mm (20.71 x 4.69 in) on 470 x 63 mm port centres, and by SWEP's published weight formula a 30-plate unit comes to about 6.2 kg (13.6 lb) dry. Maximum flow for the frame is 17 m3/h (74.85 GPM); that is a ceiling for the ports, not a duty point. If the duty has changed since the original equipment went in, send the flows and both inlet conditions and we will confirm wether this configuration still fits.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
30
Pass Arrangement:
Single pass (1P)
Connections:
4x1"
Plate Pack (A x B):
526 x 119 mm (20.71 x 4.69 in)
Port Centres (C x D):
470 x 63 mm (18.5 x 2.48 in)
Dry Weight (calculated):
6.2 kg (13.6 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 17 m3/h (74.85 GPM)
- Max Plates on Frame: 160
- Approvals: PED, UL, KHK
