1-805-484-2992
Quotes - Engineering - SalesB85Hx50/1P-SC-M 4x1"&22U(20)
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 50 | 74.85 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B85Hx50/1P-SC-M 4x1"&22U(20) as shown on this page.
Description
The B85Hx50/1P-SC-M 4x1"&22U(20) is a 50-plate build of the SWEP B85. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. Reading the string: /1P is single pass; -SC is 316/316L stainless steel plates joined with copper. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. Connections are listed as 4x1"&22U(20), in port order. The B85 plate pack measures 526 x 119 mm (20.71 x 4.69 in) on 470 x 63 mm port centres, and by SWEP's published weight formula a 50-plate unit comes to about 8.9 kg (19.7 lb) dry. Maximum flow for the frame is 17 m3/h (74.85 GPM); that is a ceiling for the ports, not a duty point. If the flow on either side would exceed the published ceiling, the answer is a larger frame, not more plates on this one.
Product Overview
Part Number:
B85Hx50/1P-SC-M 4x1"&22U(20)
Series:
SWEP B85
Brand:
SWEP
SWEP Article Number:
16801-050
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
50
Pass Arrangement:
Single pass (1P)
Connections:
4x1"&22U(20)
Plate Pack (A x B):
526 x 119 mm (20.71 x 4.69 in)
Port Centres (C x D):
470 x 63 mm (18.5 x 2.48 in)
Dry Weight (calculated):
8.9 kg (19.7 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 17 m3/h (74.85 GPM)
- Max Plates on Frame: 160
- Approvals: PED, UL, KHK
