1-805-484-2992
Quotes - Engineering - SalesP80x70
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 70 | 74.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n P80x70 as shown on this page.
Description
The P80x70 is a 70-plate build of the SWEP P80. The P80 plate pack measures 526 x 119 mm (20.71 x 4.69 in) on 470 x 63 mm port centres, and by SWEP's published weight formula a 70-plate unit comes to about 16.2 kg (35.7 lb) dry. The frame is published to 16.9 m3/h (74.41 GPM) - a port limit rather than a design flow. If the duty has changed since the original equipment went in, send the flows and both inlet conditions and we will confirm whether this configuration still fits.
Product Overview
Configuration & Size
Plates:
70
Plate Pack (A x B):
526 x 119 mm (20.71 x 4.69 in)
Port Centres (C x D):
470 x 63 mm (18.5 x 2.48 in)
Dry Weight (calculated):
16.2 kg (35.7 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 16.9 m3/h (74.41 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
