1-805-484-2992
Quotes - Engineering - SalesDP310x220
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 220 | 264.17 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n DP310x220 as shown on this page.
Description
DP310x220 designates a SWEP DP310 brazed plate heat exchanger with 220 plates in the pack. The DP310 plate pack measures 525 x 243 mm (20.67 x 9.57 in), and by SWEP's published weight formula a 220-plate unit comes to about 83.0 kg (183.0 lb) dry. Maximum flow for the frame is 60 m3/h (264.17 GPM); that is a ceiling for the ports, not a duty point. For a new duty, send the inlet temperature on each side and the flows, and we will say immediately whether this plate count is the right one.
Product Overview
Configuration & Size
Plates:
220
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Dry Weight (calculated):
83.0 kg (183.0 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 60 m3/h (264.17 GPM)
- Max Plates on Frame: 350
