1-805-484-2992
Quotes - Engineering - SalesB120THx30
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 30 | 120.64 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B120THx30 as shown on this page.
Description
The B120THx30 is a 30-plate build of the SWEP B120T. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The B120T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 456 x 174 mm port centres, and by SWEP's published weight formula a 30-plate unit comes to about 20.5 kg (45.1 lb) dry. Maximum flow for the frame is 27.4 m3/h (120.64 GPM); that is a ceiling for the ports, not a duty point. Where a nameplate is worn, the plate count and the connection sizes are usually enough to separate this build from its neighbours in the series.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
30
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
456 x 174 mm (17.95 x 6.85 in)
Dry Weight (calculated):
20.5 kg (45.1 lb)
Materials of Construction
- Plates: 304 stainless steel
- Braze: Copper
Rating
- Max Flow: 27.4 m3/h (120.64 GPM)
- Max Plates on Frame: 250
- Approvals: PED, UL, KHK
