1-805-484-2992
Quotes - Engineering - SalesB120THx60/1P-SC-S 4x2"
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 60 | 120.64 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B120THx60/1P-SC-S 4x2" as shown on this page.
Description
This is the 60-plate B120T: SWEP designation B120THx60/1P-SC-S 4x2". Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing S is the pressure class: 31 bar at 155 C. The connection field reads 4x2". The B120T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 456 x 174 mm port centres, and by SWEP's published weight formula a 60-plate unit comes to about 32.6 kg (71.8 lb) dry. Maximum flow for the frame is 27.4 m3/h (120.64 GPM); that is a ceiling for the ports, not a duty point. Treat each side as an independent circuit when you ask for a quote: give both flows and what each fluid is.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
60
Pass Arrangement:
Single pass (1P)
Connections:
4x2"
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
456 x 174 mm (17.95 x 6.85 in)
Dry Weight (calculated):
32.6 kg (71.8 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 27.4 m3/h (120.64 GPM)
- Max Plates on Frame: 250
- Approvals: PED, UL, KHK
