1-805-484-2992
Quotes - Engineering - SalesB120THx80
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 80 | 120.64 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B120THx80 as shown on this page.
Description
The B120THx80 is a 80-plate build of the SWEP B120T. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The B120T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 456 x 174 mm port centres, and by SWEP's published weight formula a 80-plate unit comes to about 40.6 kg (89.6 lb) dry. The frame is published to 27.4 m3/h (120.64 GPM) - a port limit rather than a design flow. A like-for-like order needs only this string; we reccomend adding the fluids and flows where the system has been altered.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
80
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
456 x 174 mm (17.95 x 6.85 in)
Dry Weight (calculated):
40.6 kg (89.6 lb)
Materials of Construction
- Plates: 304 stainless steel
- Braze: Copper
Rating
- Max Flow: 27.4 m3/h (120.64 GPM)
- Max Plates on Frame: 250
- Approvals: PED, UL, KHK
