1-805-484-2992
Quotes - Engineering - SalesB185Hx100/1P-SC-U 2x42.4&35.1+2x48.3&42U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 100 | 170.83 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B185Hx100/1P-SC-U 2x42.4&35.1+2x48.3&42U as shown on this page.
Description
The B185Hx100/1P-SC-U 2x42.4&35.1+2x48.3&42U is a 100-plate build of the SWEP B185. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing U is the pressure class: 64 to 140 bar. It is catalogued with 2x42.4&35.1+2x48.3&42U connections. The B185 plate pack measures 425.2 x 203.2 mm (16.74 x 8 in) on 354 x 126 mm port centres, and by SWEP's published weight formula a 100-plate unit comes to about 55.0 kg (121.2 lb) dry. Maximum flow for the frame is 38.8 m3/h (170.83 GPM); that is a ceiling for the ports, not a duty point. Check the connection field separately from the plate count: two units can be consistent in every other field and still not pipe up.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
100
Pass Arrangement:
Single pass (1P)
Connections:
2x42.4&35.1+2x48.3&42U
Plate Pack (A x B):
425.2 x 203.2 mm (16.74 x 8 in)
Port Centres (C x D):
354 x 126 mm (13.94 x 4.96 in)
Dry Weight (calculated):
55.0 kg (121.2 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: U - 64 to 140 bar
- Max Flow: 38.8 m3/h (170.83 GPM)
- Max Plates on Frame: 229
- Approvals: PED, UL, KHK
