1-805-484-2992
Quotes - Engineering - SalesB185Hx60/1P-SC-U 2x42.4&35.1+2x48.3&42U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 60 | 170.83 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B185Hx60/1P-SC-U 2x42.4&35.1+2x48.3&42U as shown on this page.
Description
The B185Hx60/1P-SC-U 2x42.4&35.1+2x48.3&42U is a 60-plate build of the SWEP B185. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing U is the pressure class: 64 to 140 bar. Connections are listed as 2x42.4&35.1+2x48.3&42U, in port order. The B185 plate pack measures 425.2 x 203.2 mm (16.74 x 8 in) on 354 x 126 mm port centres, and by SWEP's published weight formula a 60-plate unit comes to about 37.5 kg (82.7 lb) dry. The frame is published to 38.8 m3/h (170.83 GPM) - a port limit rather than a design flow. If the flow on either side would exceed the published ceiling, the answer is a larger frame, not more plates on this one.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
60
Pass Arrangement:
Single pass (1P)
Connections:
2x42.4&35.1+2x48.3&42U
Plate Pack (A x B):
425.2 x 203.2 mm (16.74 x 8 in)
Port Centres (C x D):
354 x 126 mm (13.94 x 4.96 in)
Dry Weight (calculated):
37.5 kg (82.7 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: U - 64 to 140 bar
- Max Flow: 38.8 m3/h (170.83 GPM)
- Max Plates on Frame: 229
- Approvals: PED, UL, KHK
