B200THx100/1P-SC-S 2"+2"+2x2"

B200THx100/1P-SC-S 2"+2"+2x2" designates a SWEP B200T brazed plate heat exchanger with 100 plates in the pack. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. Reading the string: /1P is single pass; -SC is 316/316L stainless steel plates joined with copper. The closing S is the pressure class: 31 bar at 155 C. The connection field reads 2"+2"+2x2". The B200T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 448.5 x 163.5 mm port centres, and by SWEP's published weight formula a 100-plate unit comes to about 52.6 kg (116.0 lb) dry. Maximum flow for the frame is 43.7 m3/h (192.41 GPM); that is a ceiling for the ports, not a duty point. Where a nameplate is worn, the plate count and the connection sizes are usually enough to separate this build from its neighbours in the series.