1-805-484-2992
Quotes - Engineering - SalesB220Mx80/1P-SC-S 4x2"
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 80 | 171.71 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B220Mx80/1P-SC-S 4x2" as shown on this page.
Description
The B220Mx80/1P-SC-S 4x2" is a 80-plate build of the SWEP B220. Its M plates are the middle pattern - between the high-transfer H plate and the low-drop L plate. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing S is the pressure class: 31 bar at 155 C. Connections are listed as 4x2", in port order. The B220 plate pack measures 524 x 202 mm (20.63 x 7.95 in) on 442 x 120 mm port centres, and by SWEP's published weight formula a 80-plate unit comes to about 36.0 kg (79.3 lb) dry. Maximum flow for the frame is 39 m3/h (171.71 GPM); that is a ceiling for the ports, not a duty point. If the duty has changed since the original equipment went in, send the flows and both inlet conditions and we will confirm whether this configuration still fits.
Product Overview
Configuration & Size
Plate Type:
M - between H and L
Plates:
80
Pass Arrangement:
Single pass (1P)
Connections:
4x2"
Plate Pack (A x B):
524 x 202 mm (20.63 x 7.95 in)
Port Centres (C x D):
442 x 120 mm (17.4 x 4.72 in)
Dry Weight (calculated):
36.0 kg (79.3 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 39 m3/h (171.71 GPM)
- Max Plates on Frame: 296
- Approvals: PED, UL, KHK
