B35TM0x20/1P-SC-S 4x2"

B35TM0x20/1P-SC-S 4x2" designates a SWEP B35T brazed plate heat exchanger with 20 plates in the pack. The digit after the plate letter (M0) tracks port size and port centre distance rather than heat transfer, so on a replacement it is the field that decides whether the unit lines up with the existing pipework. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing S is the pressure class: 31 bar at 155 C. The connection field reads 4x2". The B35T plate pack measures 393 x 243 mm (15.47 x 9.57 in) on 324 x 174 mm port centres, and by SWEP's published weight formula a 20-plate unit comes to about 13.6 kg (30.1 lb) dry. The frame is published to 27 m3/h (118.88 GPM) - a port limit rather than a design flow. For a new duty, send the inlet temperature on each side and the flows, and we will say immediatly whether this plate count is the right one.