1-805-484-2992
Quotes - Engineering - SalesB50Lx100/1P-SC-S 4x2 1/2"(54)
SWEP| Product | Type | Plates | Series |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 100 | B50 |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B50Lx100/1P-SC-S 4x2 1/2"(54) as shown on this page.
Description
Part number B50Lx100/1P-SC-S 4x2 1/2"(54) is the SWEP B50 frame carrying 100 plates. Its L plates are the low-theta pattern: less pressure drop per plate, and correspondingly more plates for the same duty. Reading the string: /1P is single pass; -SC is 316/316L stainless steel plates joined with copper. The closing S is the pressure class: 31 bar at 155 C. The connection field reads 4x2 1/2"(54). The B50 plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 441 x 159 mm port centres. If any field on your nameplate differs from the string above, tell us which one; a single letter is relevant to both rating and fit.
Product Overview
Part Number:
B50Lx100/1P-SC-S 4x2 1/2"(54)
Series:
SWEP B50
Brand:
SWEP
SWEP Article Number:
10323-100*1
Configuration & Size
Plate Type:
L - acute chevron, low pressure drop
Plates:
100
Pass Arrangement:
Single pass (1P)
Connections:
4x2 1/2"(54)
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
441 x 159 mm (17.36 x 6.26 in)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
