1-805-484-2992
Quotes - Engineering - SalesP120Tx180
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 180 | 120.64 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n P120Tx180 as shown on this page.
Description
This is the 180-plate P120T: SWEP designation P120Tx180. The P120T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 456 x 174 mm port centres, and by SWEP's published weight formula a 180-plate unit comes to about 84.6 kg (186.6 lb) dry. The frame is published to 27.4 m3/h (120.64 GPM) - a port limit rather than a design flow. Where a nameplate is worn, the plate count and the connection sizes are usually enough to separate this build from its neighbours in the series.
Product Overview
Configuration & Size
Plates:
180
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
456 x 174 mm (17.95 x 6.85 in)
Dry Weight (calculated):
84.6 kg (186.6 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 27.4 m3/h (120.64 GPM)
- Max Plates on Frame: 250
- Approvals: PED, UL, KHK
