1-805-484-2992
Quotes - Engineering - SalesP120Tx200
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 200 | 120.64 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n P120Tx200 as shown on this page.
Description
P120Tx200 designates a SWEP P120T brazed plate heat exchanger with 200 plates in the pack. The P120T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 456 x 174 mm port centres, and by SWEP's published weight formula a 200-plate unit comes to about 93.1 kg (205.3 lb) dry. The frame is published to 27.4 m3/h (120.64 GPM) - a port limit rather than a design flow. For a new duty, send the inlet temperature on each side and the flows, and we will say immediatly whether this plate count is the right one.
Product Overview
Configuration & Size
Plates:
200
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
456 x 174 mm (17.95 x 6.85 in)
Dry Weight (calculated):
93.1 kg (205.3 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 27.4 m3/h (120.64 GPM)
- Max Plates on Frame: 250
- Approvals: PED, UL, KHK
