1-805-484-2992
Quotes - Engineering - SalesP120Tx220
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 220 | 120.64 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n P120Tx220 as shown on this page.
Description
This is the 220-plate P120T: SWEP designation P120Tx220. The P120T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 456 x 174 mm port centres, and by SWEP's published weight formula a 220-plate unit comes to about 101.6 kg (224.0 lb) dry. Maximum flow for the frame is 27.4 m3/h (120.64 GPM); that is a ceiling for the ports, not a duty point. Where a nameplate is worn, the plate count and the connection sizes are usually enough to separate this build from its neighbours in the series.
Product Overview
Configuration & Size
Plates:
220
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
456 x 174 mm (17.95 x 6.85 in)
Dry Weight (calculated):
101.6 kg (224.0 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 27.4 m3/h (120.64 GPM)
- Max Plates on Frame: 250
- Approvals: PED, UL, KHK
