1-805-484-2992
Quotes - Engineering - SalesB427Hx240/1P-SC-S / 4xDN100C cs
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 240 | 684.65 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B427Hx240/1P-SC-S / 4xDN100C cs as shown on this page.
Description
Part number B427Hx240/1P-SC-S / 4xDN100C cs is the SWEP B427 frame carrying 240 plates. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing S is the pressure class: 31 bar at 155 C. It is catalogued with / 4xDN100C cs connections. The B427 plate pack measures 694 x 304 mm (27.32 x 11.97 in) on 567 x 179 mm port centres, and by SWEP's published weight formula a 240-plate unit comes to about 172.1 kg (379.5 lb) dry. The frame is published to 155.5 m3/h (684.65 GPM) - a port limit rather than a design flow. Check the connection field seperately from the plate count: two units can be consistent in every other field and still not pipe up.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
240
Pass Arrangement:
Single pass (1P)
Connections:
/ 4xDN100C cs
Plate Pack (A x B):
694 x 304 mm (27.32 x 11.97 in)
Port Centres (C x D):
567 x 179 mm (22.32 x 7.05 in)
Dry Weight (calculated):
172.1 kg (379.5 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 155.5 m3/h (684.65 GPM)
- Max Plates on Frame: 420
- Approvals: PED, UL, KHK
