1-805-484-2992
Quotes - Engineering - SalesDP700x60
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 60 | 554.76 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n DP700x60 as shown on this page.
Description
Part number DP700x60 is the SWEP DP700 frame carrying 60 plates. The DP700 plate pack measures 725 x 302 mm (28.54 x 11.89 in) on 546 x 191 mm port centres, and by SWEP's published weight formula a 60-plate unit comes to about 48.3 kg (106.4 lb) dry. The frame is published to 126 m3/h (554.76 GPM) - a port limit rather than a design flow. Treat each side as an independent circuit when you ask for a quote: give both flows and what each fluid is.
Product Overview
Configuration & Size
Plates:
60
Plate Pack (A x B):
725 x 302 mm (28.54 x 11.89 in)
Port Centres (C x D):
546 x 191 mm (21.50 x 7.52 in)
Dry Weight (calculated):
48.3 kg (106.4 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 126 m3/h (554.76 GPM)
- Max Plates on Frame: 362
