1-805-484-2992
Quotes - Engineering - SalesDP700x90
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 90 | 554.76 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n DP700x90 as shown on this page.
Description
The DP700x90 is a 90-plate build of the SWEP DP700. The DP700 plate pack measures 725 x 302 mm (28.54 x 11.89 in) on 546 x 191 mm port centres, and by SWEP's published weight formula a 90-plate unit comes to about 66.5 kg (146.7 lb) dry. The frame is published to 126 m3/h (554.76 GPM) - a port limit rather than a design flow. If the flow on either side would exceed the published ceiling, the answer is a larger frame, not more plates on this one.
Product Overview
Configuration & Size
Plates:
90
Plate Pack (A x B):
725 x 302 mm (28.54 x 11.89 in)
Port Centres (C x D):
546 x 191 mm (21.50 x 7.52 in)
Dry Weight (calculated):
66.5 kg (146.7 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 126 m3/h (554.76 GPM)
- Max Plates on Frame: 362
