1-805-484-2992
Quotes - Engineering - SalesS500Tx220
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 220 | 684.65 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n S500Tx220 as shown on this page.
Description
Part number S500Tx220 is the SWEP S500T frame carrying 220 plates. The S500T plate pack measures 979 x 304 mm (38.54 x 11.97 in) on 854 x 179 mm port centres, and by SWEP's published weight formula a 220-plate unit comes to about 240.1 kg (529.4 lb) dry. The frame is published to 155.5 m3/h (684.65 GPM) - a port limit rather than a design flow. Where a nameplate is worn, the plate count and the connection sizes are usually enough to separate this build from its neighbours in the series.
Product Overview
Configuration & Size
Plates:
220
Plate Pack (A x B):
979 x 304 mm (38.54 x 11.97 in)
Port Centres (C x D):
854 x 179 mm (33.62 x 7.05 in)
Dry Weight (calculated):
240.1 kg (529.4 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 155.5 m3/h (684.65 GPM)
- Max Plates on Frame: 420
- Approvals: PED, UL, KHK
