1-805-484-2992
Quotes - Engineering - SalesB5THx30/1P-SC-M 2x3/4"INT HEX+2x1/2"INT HEX
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 30 | 17.61 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B5THx30/1P-SC-M 2x3/4"INT HEX+2x1/2"INT HEX as shown on this page.
Description
The B5THx30/1P-SC-M 2x3/4"INT HEX+2x1/2"INT HEX is a 30-plate build of the SWEP B5T. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. It is catalogued with 2x3/4"INT HEX+2x1/2"INT HEX connections. The B5T plate pack measures 193 x 76 mm (7.6 x 2.99 in) on 154 x 40 mm port centres, and by SWEP's published weight formula a 30-plate unit comes to about 1.9 kg (4.2 lb) dry. Maximum flow for the frame is 4 m3/h (17.61 GPM); that is a ceiling for the ports, not a duty point. If the flow on either side would exceed the published ceiling, the answer is a larger frame, not more plates on this one.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
30
Pass Arrangement:
Single pass (1P)
Connections:
2x3/4"INT HEX+2x1/2"INT HEX
Plate Pack (A x B):
193 x 76 mm (7.6 x 2.99 in)
Port Centres (C x D):
154 x 40 mm (6.06 x 1.57 in)
Dry Weight (calculated):
1.9 kg (4.2 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 4 m3/h (17.61 GPM)
- Max Plates on Frame: 61
- Approvals: PED, UL, KHK
