1-805-484-2992
Quotes - Engineering - SalesE6THx40/1P-SC-S 4x3/4"
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 40 | 17.61 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n E6THx40/1P-SC-S 4x3/4" as shown on this page.
Description
The E6THx40/1P-SC-S 4x3/4" is a 40-plate build of the SWEP E6T. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing S is the pressure class: 31 bar at 155 C. It is catalogued with 4x3/4" connections. The E6T plate pack measures 210 x 73 mm (8.27 x 2.87 in) on 172 x 40 mm port centres, and by SWEP's published weight formula a 40-plate unit comes to about 2.2 kg (4.8 lb) dry. The frame is published to 4 m3/h (17.61 GPM) - a port limit rather than a design flow. Check the connection field separately from the plate count: two units can be consistent in every other field and still not pipe up.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
40
Pass Arrangement:
Single pass (1P)
Connections:
4x3/4"
Plate Pack (A x B):
210 x 73 mm (8.27 x 2.87 in)
Port Centres (C x D):
172 x 40 mm (6.77 x 1.57 in)
Dry Weight (calculated):
2.2 kg (4.8 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 4 m3/h (17.61 GPM)
- Max Plates on Frame: 40
- Approvals: PED, UL, KHK
