1-805-484-2992
Quotes - Engineering - SalesB10THx26/1P-SC-M
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 26 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B10THx26/1P-SC-M as shown on this page.
Description
This is the 26-plate B10T: SWEP designation B10THx26/1P-SC-M. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. Reading the string: /1P is single pass; -SC is 316/316L stainless steel plates joined with copper. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. The B10T plate pack measures 289 x 119 mm (11.38 x 4.69 in) on 243 x 72 mm port centres, and by SWEP's published weight formula a 26-plate unit comes to about 3.6 kg (8.0 lb) dry. The frame is published to 9 m3/h (39.63 GPM) - a port limit rather than a design flow. If any field on your nameplate differs from the string above, tell us which one; a single letter is relevent to both rating and fit.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
26
Pass Arrangement:
Single pass (1P)
Plate Pack (A x B):
289 x 119 mm (11.38 x 4.69 in)
Port Centres (C x D):
243 x 72 mm (9.57 x 2.83 in)
Dry Weight (calculated):
3.6 kg (8.0 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
