1-805-484-2992
Quotes - Engineering - SalesB10THx30
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 30 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B10THx30 as shown on this page.
Description
This is the 30-plate B10T: SWEP designation B10THx30. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The B10T plate pack measures 289 x 119 mm (11.38 x 4.69 in) on 243 x 72 mm port centres, and by SWEP's published weight formula a 30-plate unit comes to about 4.0 kg (8.9 lb) dry. The frame is published to 9 m3/h (39.63 GPM) - a port limit rather than a design flow. If the duty has changed since the original equipment went in, send the flows and both inlet conditions and we will confirm whether this configuration still fits.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
30
Plate Pack (A x B):
289 x 119 mm (11.38 x 4.69 in)
Port Centres (C x D):
243 x 72 mm (9.57 x 2.83 in)
Dry Weight (calculated):
4.0 kg (8.9 lb)
Materials of Construction
- Plates: 304 stainless steel
- Braze: Copper
Rating
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
