B10THx60/1P-SC-S / B10THx60/1P-SC-M

B10THx60/1P-SC-S / B10THx60/1P-SC-M designates a SWEP B10T brazed plate heat exchanger with 60 plates in the pack. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing S is the pressure class: 31 bar at 155 C. The connection field reads / B10THx60/1P-SC-M. The B10T plate pack measures 289 x 119 mm (11.38 x 4.69 in) on 243 x 72 mm port centres, and by SWEP's published weight formula a 60-plate unit comes to about 6.9 kg (15.2 lb) dry. The frame is published to 9 m3/h (39.63 GPM) - a port limit rather than a design flow. If the duty has changed since the original equipment went in, send the flows and both inlet conditions and we will confirm whether this configuration still fits.