1-805-484-2992
Quotes - Engineering - SalesB10TSHx20/1P-SPS-S 4x1"&22U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 20 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B10TSHx20/1P-SPS-S 4x1"&22U as shown on this page.
Description
The B10TSHx20/1P-SPS-S 4x1"&22U is a 20-plate build of the SWEP B10TS. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. Reading the string: /1P is single pass; -SPS is 316 stainless steel plates joined with stainless, copper free. The closing S is the pressure class: 31 bar at 155 C. It is catalogued with 4x1"&22U connections. The B10TS plate pack measures 289 x 119 mm (11.38 x 4.69 in) on 243 x 72 mm port centres, and by SWEP's published weight formula a 20-plate unit comes to about 3.7 kg (8.1 lb) dry. The frame is published to 9 m3/h (39.63 GPM) - a port limit rather than a design flow. It is not necessary to send drawings for a like-for-like replacement - the string above carries the whole build.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
20
Pass Arrangement:
Single pass (1P)
Connections:
4x1"&22U
Plate Pack (A x B):
289 x 119 mm (11.38 x 4.69 in)
Port Centres (C x D):
243 x 72 mm (9.57 x 2.83 in)
Dry Weight (calculated):
3.7 kg (8.1 lb)
Materials of Construction
- Plates: 316 stainless steel
- Braze: Stainless, copper free
- Material Code: SPS
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 141
- Approvals: PED, UL, KHK
