1-805-484-2992
Quotes - Engineering - SalesB10TSHx80/1P-SPS-S 4x1"&22U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 80 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B10TSHx80/1P-SPS-S 4x1"&22U as shown on this page.
Description
This is the 80-plate B10TS: SWEP designation B10TSHx80/1P-SPS-S 4x1"&22U. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SPS fields read as single pass, with 316 stainless steel plates and a stainless, copper free braze. The closing S is the pressure class: 31 bar at 155 C. It is catalogued with 4x1"&22U connections. The B10TS plate pack measures 289 x 119 mm (11.38 x 4.69 in) on 243 x 72 mm port centres, and by SWEP's published weight formula a 80-plate unit comes to about 10.9 kg (24.1 lb) dry. Maximum flow for the frame is 9 m3/h (39.63 GPM); that is a ceiling for the ports, not a duty point. Thermal performence depends on the duty as much as on the part number, so include the fluids if the unit is going into a new application.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
80
Pass Arrangement:
Single pass (1P)
Connections:
4x1"&22U
Plate Pack (A x B):
289 x 119 mm (11.38 x 4.69 in)
Port Centres (C x D):
243 x 72 mm (9.57 x 2.83 in)
Dry Weight (calculated):
10.9 kg (24.1 lb)
Materials of Construction
- Plates: 316 stainless steel
- Braze: Stainless, copper free
- Material Code: SPS
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 141
- Approvals: PED, UL, KHK
