1-805-484-2992
Quotes - Engineering - SalesB18Lx30/1P-SC-U 4xS28.58&W35.1
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 30 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B18Lx30/1P-SC-U 4xS28.58&W35.1 as shown on this page.
Description
This is the 30-plate B18: SWEP designation B18Lx30/1P-SC-U 4xS28.58&W35.1. Its L plates are the low-theta pattern: less pressure drop per plate, and correspondingly more plates for the same duty. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing U is the pressure class: 64 to 140 bar. It is catalogued with 4xS28.58&W35.1 connections. The B18 plate pack measures 377 x 119.5 mm (14.84 x 4.7 in) on 329 x 72 mm port centres, and by SWEP's published weight formula a 30-plate unit comes to about 11.6 kg (25.5 lb) dry. Maximum flow for the frame is 9 m3/h (39.63 GPM); that is a ceiling for the ports, not a duty point. If the duty has changed since the original equipment went in, send the flows and both inlet conditions and we will confirm whether this configuration still fits.
Product Overview
Configuration & Size
Plate Type:
L - acute chevron, low pressure drop
Plates:
30
Pass Arrangement:
Single pass (1P)
Connections:
4xS28.58&W35.1
Plate Pack (A x B):
377 x 119.5 mm (14.84 x 4.7 in)
Port Centres (C x D):
329 x 72 mm (12.95 x 2.83 in)
Dry Weight (calculated):
11.6 kg (25.5 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: U - 64 to 140 bar
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
