1-805-484-2992
Quotes - Engineering - SalesB18Lx40/1P-SC-U 4xS28.58&W35.1
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 40 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B18Lx40/1P-SC-U 4xS28.58&W35.1 as shown on this page.
Description
The B18Lx40/1P-SC-U 4xS28.58&W35.1 is a 40-plate build of the SWEP B18. Its L plates are the low-theta pattern: less pressure drop per plate, and correspondingly more plates for the same duty. Reading the string: /1P is single pass; -SC is 316/316L stainless steel plates joined with copper. The closing U is the pressure class: 64 to 140 bar. Connections are listed as 4xS28.58&W35.1, in port order. The B18 plate pack measures 377 x 119.5 mm (14.84 x 4.7 in) on 329 x 72 mm port centres, and by SWEP's published weight formula a 40-plate unit comes to about 14.1 kg (31.0 lb) dry. Maximum flow for the frame is 9 m3/h (39.63 GPM); that is a ceiling for the ports, not a duty point. For a new duty, send the inlet temperature on each side and the flows, and we will say immediately wether this plate count is the right one.
Product Overview
Configuration & Size
Plate Type:
L - acute chevron, low pressure drop
Plates:
40
Pass Arrangement:
Single pass (1P)
Connections:
4xS28.58&W35.1
Plate Pack (A x B):
377 x 119.5 mm (14.84 x 4.7 in)
Port Centres (C x D):
329 x 72 mm (12.95 x 2.83 in)
Dry Weight (calculated):
14.1 kg (31.0 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: U - 64 to 140 bar
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
