1-805-484-2992
Quotes - Engineering - SalesB20Hx52/1P-NSC-M 9.65+16+2x1"&22U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 52 | 42.71 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B20Hx52/1P-NSC-M 9.65+16+2x1"&22U as shown on this page.
Description
The B20Hx52/1P-NSC-M 9.65+16+2x1"&22U is a 52-plate build of the SWEP B20. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. Reading the string: /1P is single pass; -NSC is 316 channel plates, 304 cover plates plates joined with copper. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. The connection field reads 9.65+16+2x1"&22U. The B20 plate pack measures 324 x 94 mm (12.76 x 3.70 in) on 268.2 x 39 mm port centres, and by SWEP's published weight formula a 52-plate unit comes to about 4.7 kg (10.4 lb) dry. Maximum flow for the frame is 9.7 m3/h (42.71 GPM); that is a ceiling for the ports, not a duty point. If the flow on either side would excede the published ceiling, the answer is a larger frame, not more plates on this one.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
52
Pass Arrangement:
Single pass (1P)
Connections:
9.65+16+2x1"&22U
Plate Pack (A x B):
324 x 94 mm (12.76 x 3.70 in)
Port Centres (C x D):
268.2 x 39 mm (10.56 x 1.54 in)
Dry Weight (calculated):
4.7 kg (10.4 lb)
Materials of Construction
- Plates: 316 channel plates, 304 cover plates
- Braze: Copper
- Material Code: NSC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 9.7 m3/h (42.71 GPM)
- Max Plates on Frame: 140
