1-805-484-2992
Quotes - Engineering - SalesB20Hx70/1P-NSC-M 9.65+16+2x1"&22U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 70 | 42.71 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B20Hx70/1P-NSC-M 9.65+16+2x1"&22U as shown on this page.
Description
B20Hx70/1P-NSC-M 9.65+16+2x1"&22U designates a SWEP B20 brazed plate heat exchanger with 70 plates in the pack. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-NSC fields read as single pass, with 316 channel plates, 304 cover plates plates and a copper braze. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. The connection field reads 9.65+16+2x1"&22U. The B20 plate pack measures 324 x 94 mm (12.76 x 3.70 in) on 268.2 x 39 mm port centres, and by SWEP's published weight formula a 70-plate unit comes to about 6.0 kg (13.2 lb) dry. Maximum flow for the frame is 9.7 m3/h (42.71 GPM); that is a ceiling for the ports, not a duty point. If any field on your nameplate differs from the string above, tell us which one; a single letter is relevant to both rating and fit.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
70
Pass Arrangement:
Single pass (1P)
Connections:
9.65+16+2x1"&22U
Plate Pack (A x B):
324 x 94 mm (12.76 x 3.70 in)
Port Centres (C x D):
268.2 x 39 mm (10.56 x 1.54 in)
Dry Weight (calculated):
6.0 kg (13.2 lb)
Materials of Construction
- Plates: 316 channel plates, 304 cover plates
- Braze: Copper
- Material Code: NSC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 9.7 m3/h (42.71 GPM)
- Max Plates on Frame: 140
