1-805-484-2992
Quotes - Engineering - SalesB25THx10/1P-SC-S 0235038.0
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 10 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B25THx10/1P-SC-S 0235038.0 as shown on this page.
Description
B25THx10/1P-SC-S 0235038.0 designates a SWEP B25T brazed plate heat exchanger with 10 plates in the pack. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing S is the pressure class: 31 bar at 155 C. The B25T plate pack measures 526 x 119 mm (20.71 x 4.69 in) on 479 x 72 mm port centres, and by SWEP's published weight formula a 10-plate unit comes to about 3.9 kg (8.6 lb) dry. Maximum flow for the frame is 9 m3/h (39.63 GPM); that is a ceiling for the ports, not a duty point. Check the connection field separately from the plate count: two units can be consistent in every other field and still not pipe up.
Product Overview
Part Number:
B25THx10/1P-SC-S 0235038.0
Series:
SWEP B25T
Brand:
SWEP
Configuration Number:
0235038.0
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
10
Pass Arrangement:
Single pass (1P)
Plate Pack (A x B):
526 x 119 mm (20.71 x 4.69 in)
Port Centres (C x D):
479 x 72 mm (18.86 x 2.83 in)
Dry Weight (calculated):
3.9 kg (8.6 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
