1-805-484-2992
Quotes - Engineering - SalesB25THx16/1P-SC-M
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 16 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B25THx16/1P-SC-M as shown on this page.
Description
Part number B25THx16/1P-SC-M is the SWEP B25T frame carrying 16 plates. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. Reading the string: /1P is single pass; -SC is 316/316L stainless steel plates joined with copper. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. The B25T plate pack measures 526 x 119 mm (20.71 x 4.69 in) on 479 x 72 mm port centres, and by SWEP's published weight formula a 16-plate unit comes to about 5.0 kg (11.0 lb) dry. The frame is published to 9 m3/h (39.63 GPM) - a port limit rather than a design flow. If the duty has changed since the original equiptment went in, send the flows and both inlet conditions and we will confirm whether this configuration still fits.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
16
Pass Arrangement:
Single pass (1P)
Plate Pack (A x B):
526 x 119 mm (20.71 x 4.69 in)
Port Centres (C x D):
479 x 72 mm (18.86 x 2.83 in)
Dry Weight (calculated):
5.0 kg (11.0 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
