1-805-484-2992
Quotes - Engineering - SalesB25THx50
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 50 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B25THx50 as shown on this page.
Description
This is the 50-plate B25T: SWEP designation B25THx50. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The B25T plate pack measures 526 x 119 mm (20.71 x 4.69 in) on 479 x 72 mm port centres, and by SWEP's published weight formula a 50-plate unit comes to about 11.0 kg (24.3 lb) dry. The frame is published to 9 m3/h (39.63 GPM) - a port limit rather than a design flow. Where a nameplate is worn, the plate count and the connection sizes are usually enough to separate this build from its neighbours in the series.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
50
Plate Pack (A x B):
526 x 119 mm (20.71 x 4.69 in)
Port Centres (C x D):
479 x 72 mm (18.86 x 2.83 in)
Dry Weight (calculated):
11.0 kg (24.3 lb)
Materials of Construction
- Plates: 304 stainless steel
- Braze: Copper
Rating
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
