1-805-484-2992
Quotes - Engineering - SalesB26FHx18/1P-SC-M 6.5 Spec+9.65+2x1"&22U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 18 | 49.75 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B26FHx18/1P-SC-M 6.5 Spec+9.65+2x1"&22U as shown on this page.
Description
The B26FHx18/1P-SC-M 6.5 Spec+9.65+2x1"&22U is a 18-plate build of the SWEP B26. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. The connection field reads 6.5 Spec+9.65+2x1"&22U. The B26 plate pack measures 376 x 119 mm (14.8 x 4.69 in) on 329 x 72 mm port centres, and by SWEP's published weight formula a 18-plate unit comes to about 3.7 kg (8.2 lb) dry. The frame is published to 11.3 m3/h (49.75 GPM) - a port limit rather than a design flow. For a new duty, send the inlet temperature on each side and the flows, and we will say immediately whether this plate count is the right one.
Product Overview
Part Number:
B26FHx18/1P-SC-M 6.5 Spec+9.65+2x1"&22U
Series:
SWEP B26
Brand:
SWEP
SWEP Article Number:
17814-018
Configuration & Size
Plates:
18
Pass Arrangement:
Single pass (1P)
Connections:
6.5 Spec+9.65+2x1"&22U
Plate Pack (A x B):
376 x 119 mm (14.8 x 4.69 in)
Port Centres (C x D):
329 x 72 mm (12.95 x 2.83 in)
Dry Weight (calculated):
3.7 kg (8.2 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 11.3 m3/h (49.75 GPM)
- Max Plates on Frame: 160
- Approvals: PED, UL, KHK
