1-805-484-2992
Quotes - Engineering - SalesB86Hx60/1P-SC-M 4x1"&22U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 60 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B86Hx60/1P-SC-M 4x1"&22U as shown on this page.
Description
B86Hx60/1P-SC-M 4x1"&22U designates a SWEP B86 brazed plate heat exchanger with 60 plates in the pack. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. It is catalogued with 4x1"&22U connections. The B86 plate pack measures 526 x 119 mm (20.71 x 4.69 in) on 470 x 63 mm port centres, and by SWEP's published weight formula a 60-plate unit comes to about 10.3 kg (22.7 lb) dry. Maximum flow for the frame is 9 m3/h (39.63 GPM); that is a ceiling for the ports, not a duty point. For a new duty, send the inlet temperature on each side and the flows, and we will say immediately whether this plate count is the right one.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
60
Pass Arrangement:
Single pass (1P)
Connections:
4x1"&22U
Plate Pack (A x B):
526 x 119 mm (20.71 x 4.69 in)
Port Centres (C x D):
470 x 63 mm (18.5 x 2.48 in)
Dry Weight (calculated):
10.3 kg (22.7 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 161
- Approvals: PED, UL, KHK
